High Speed Precision Lathe AHL-Serries: AHL-1860, AHL-1880, AHL-2160, AHL-2180, AHL-1860V, AHL-1880V, AHL-2160V, AHL-2180V.
| MODEL | AHL-1860
AHL-1880 | AHL-2160
AHL-2180 | AHL-18606V
AHL-1880V | AHL-2160V
AHL-2180V |
| Height of centers | 230 mm | 271mm | 230 mm | 271 mm |
| Swing over bed | Ø460 mm | Ø533 mm | Ø460 mm | Ø533mm |
| Swing in gap | Ø271 mm | Ø790 mm | Ø710 mm | Ø790 mm |
| Swing over cross slide | Ø280 mm | Ø365 mm | Ø280 mm | Ø365 mm |
| Distance between centers (mm) | 1500 | 2000 | 1500 | 2000 | 1500 | 2000 | 1500 | 2000 |
| Width of bed | 345 mm (13.58") |
| Gap width in font of faceplate | 250 mm (9.84") |
| Spindle nose, internal taper | D1-8, MT.No.7 |
| Spindle center sleeve | MT. No.7 x MT. No.5 |
| Spindle bore | Ø80 mm (3.149") |
| Spindle speed | 16 steps/25~1600 R.P.M
Green 20 65 210 670
Yellow 25 85 280 900
Red 35 140 115 380 1200
Blue 59 150 500 1600
"MATRIX" Disc clutch for Foward/Reverse | | 4 steps/ | L 18~55 R.P.M.
M 55~180 R.P.M.
MH 180~600 R.P.M.
H 600~1800 R.P.M. |
|
| Length on bed / Width of carriage | 543 mm (21.37") / 542 mm (21.33") |
| Cross slide travel | 272 mm (10.7") |
| Top slide travel | 137 mm (5.39") |
| Whitworth threads: Kinds / Range | 38 Kinds / 2~72 T.P.I. |
| Metric threads: Kinds / Range | 40 Kinds / 0.4~14 mm |
| D.P. threads: Kinds / Range | 21 Kinds / 8~44 D.P. |
| M.P. threads: Kinds / Range | 18 Kinds / 0.3~3.5 M.P. |
| Longitudinal feeds | 0.04~1.0 mm (0.0015"~0.04") |
| Cross feeds | 0.02~0.5 mm (0.00075"~0.02") |
| Quill diameter | Ø76 mm (3") |
| Quill travel | 165 mm (6.5") |
| Taper of center | MT.No.5 |
| Main spindle | 12.5HP | 12.5HP, lnverter |
| Forced lubrication for HD. |
| 1/4HP |
| Coolant pump | 1/8HP |
| Weight (Net) (kg) | 2350 | 2700 | 2650 | 3000 | 2350 | 2700 | 2650 | 3000 |
| Packing sizes | Length (mm) | 3035 | 3535 | 3035 | 3535 | 3035 | 3535 | 3035 | 3535 |
| Width x Height | Width 1120 mm (44.1") x Height 1745 mm (68.7") |
| STANDARD ACCESSORIES: |
Backplate for 12" chuck
3-Jaws scroll 12" chuck
4 way tool post
Dead center MT.5
Auto lubrication system
Full length splash guard | Spindle center sleeve MT.7
Steady rest w/ball bearing
Follow rest w/bronze tip
Level pads......8 pcs
Halogen lamp
Tool set & Box |
| OPTIONAL ACCESSORIES: |
4-Jaws independent chuck 12" for AHL-18
4-Jaws independent chuck 14" for AHL-21
5C collet closer attachment
Chuck safety guard
Hydraulic copying attachment
Tool post grinder attachment
Taper turning attachment | Protect cover on leadscrew for CE
Faceplate 14"
Drill chuck & arbor
Rotating center MT.5
Quick change tool post
Carriage micro stop set
Digital read out system |
