Gear type teeth distance tapping machine WDDM model is SB6516
Description
- The machine's feeding is driving by the change gear,the feeding setup has the spring which eliminate clearance, it can extrusion the tap so it can make the hole's precision and purgation to the ideal requirement.
- The depth of tapping can adjusting by the depth knob, it's very precise.
- The machine use the fast-changing tapping chuck. The tap is more easily to change and clamp firmly.
- Main drive and feeding system have the rub clutches respectively, it can out off drive chain automatic when it suffered some balk, it can prevent the break.
- There is an urgent bottom at the most convenience place.
- One the cover of exchanging gear there has a safety device (open the door and cut off the electricity) it can assure safety of the operator.
- In order to produce in bulk, the machine's electrical system can achieved the spindle feeding auto-circulation and spot-start single-circulation.
- The machine adopt one screw distance per circle,feeding and withdrawing automatic at synchronization, so it can tapping perfectible screw thread on kinds of usual material.
| MODEL | SB6516 |
| Max. Tapping capacity | M16mm |
| Diameter of columm | Ø85mm |
| Spindle travel | 65mm |
| Spindle head travel | 405mm |
| Distance spidle axis to column | 257.5mm |
| Distance spindle nose to base | 670mm |
| Spindle taper | MT3 |
| Spindle speeds range | 200-400-590rpm |
| Dimemsion of base | 350x350mm |
| Overal height | 1110mm |
| Motor power | 1500W |
| N.W/G.W | 280/300kg |
| Packinh dimension | 1062x640x1320mm |
Standard accessorries
- Tapping Chuck (M3-M16)
- Change gear P=1.0, P=1.25, P=1.5, P=1.75, P=2.0, P=2.5
- Stand and cooling system
- Wrench
