The complete hydraulic hole punch machine includes the HHM-80 punch head combined with the DP150-D2 electric hydraulic pump, allowing for punching holes up to Ø25mm, with a maximum thickness of 14mm on steel or 16mm on aluminum, and a throat depth of 115mm
HHM-80 Features
- C-shaped solid design, allowing punching on sheet steel, plate steel, plate iron, angel steel, channel steel, busbars...
- Flat pedestal to provide steadliness in operation.
- Punch dies made of high carbon tungsten steel and not easy to wear off
- Materials that can be punched include medium-hardness steel, iron, aluminum, or copper.
- The punch throat depth is 115mm, so it should only be used for punching small-sized materials, with the punch hole no more than 115mm from the edge of the materials.
- HHM-80 has two hydraulic port, with a maximum punching force of 50 tons
- We offer standard dies including 16, 18, 22 and 25mm
DP150-D2 Features:
- Working pressure: 700bar
- Two-stage hydraulic pump
- Two-way pump for double-acting applications
- Foot switch for hands-free remote control
- Robust and durable construction
- Roll frame for easy carrying and protection
- All the pumps are equipped with pressure gauge, which minimizes the risk of overloading and ensure long, dependable service.
- Internal pressure relief valve prevents overloading
- Long, trouble free life in the most demanding work environments.
- DP150-D2 has a very large 10 liters oil reservior, which means adequate capacity for multi-cylinder applications.
BEAM PUNCH
: HHM-80
- Cylinder Capacity
: 50ton
- Max. Dia
: 25mm
- Max. Thickness
: 14mm
- Max. Depth
: 115mm
- Weight
: 52kg
- Dimension
: 37x22x40cm
PUMP
: DP150-D2
- Pressure rating (Hight)
: 70Mpa
- Pressure rating (Low)
: 2Mpa
- Voltage
: 380V
- Motor
: 2.2KW
- Reservoir Capacity
: 35lit
- Weight
: 54kg
- Dimension
: 50×38×70cm
Standard accessories:
- Dies: 16, 18, 22 and 25mm.
- 2 hydraulic hoses 1.8m
- Foot switch
Optional accessories: 10 liters oil, other dies...
