Gear type teeth distance tapping machine Unifast model is T-4508
Description
- The machine's feeding is driving by the change gear, feeding and withdrawing automatic at synchronization, so it can tapping perfectible screw thread on
kinds of usual material.
- The depth of tapping can adjusting by the depth knob, it's very precise, there is an urgent bottom at the most convenience place.
- Solid pillar is adopted, stress is eliminated by temprering treatment, hard chrome is peted on the surface, friction resistant and rust resistan
- Beginner can also operate smoothly, automatic cycle operation, automatic reverse device, tapping depth adjustable.
- In order to produce in bulk, the machine's electrical system can achieved the spindle feeding auto-circulation and spot-start single-circulation.
| MODEL | T-4508 |
| Tapping capacity | M2 - M8 |
| Spindle travel | 45mm |
| Head travel | 260mm |
| Distance spindle nose to base | 350mm |
| Spindle taper | B16 |
| Spindle speeds range | 540/855/1445rpm |
| Spindle speeds serise | 3 step |
| Dimemsion of base | 225x230mm |
| Motor power | 750W |
| N.W/G.W | 105/140kg |
| Packinh dimension | 700x420x950mm |
Standard accessorries: Foot switch, crank, 01 gear set
Optional accessorries:
- Tapping chuck - Change gear: P=0.4, P=0.45, P=0.5, P=0.6, P=0.7, P=0.8, P=1.0
- Vice
- Multi - spindel
