Gear type teeth distance tapping machine Unifast model is TB-6532
Description
- The machine's feeding is driving by the change gear, feeding and withdrawing automatic at synchronization, so it can tapping perfectible screw thread on
kinds of usual material.
- The depth of tapping can adjusting by the depth knob, it's very precise, there is an urgent bottom at the most convenience place.
- Solid pillar is adopted, stress is eliminated by temprering treatment, hard chrome is peted on the surface, friction resistant and rust resistan
- Beginner can also operate smoothly, automatic cycle operation, automatic reverse device, tapping depth adjustable.
- In order to produce in bulk, the machine's electrical system can achieved the spindle feeding auto-circulation and spot-start single-circulation.
- TB-6532 include automatic lubrication system is nicely integrated in the stand.
| MODEL | TB-6532 |
| Max. Tapping capacity | M32 |
| Spindle travel | 65mm |
| Spindle head travel | 30mm |
| Distance spindle nose to base | 450mm |
| Spindle taper | MT3 |
| Spindle speeds range | 80-150-280rpm |
| Spindle speeds serise | 3 step |
| Motor power | 2200W |
| N.W/G.W | 400/470kg |
| Packinh dimension | 115x95x220cm |
Standard accessorries
- Tapping Chuck (optional M6-M32)
- Optional 1 set change gear
- Stand and cooling system
- Wrench
- Foot switch
Optional accessorries:
- Tapping chuck - Change gear: P=0.5, P=0.6, P=0.7, P=0.8, P=1.0, P=1.25, P=1.5, P=1.75, P=2.0, P=2.5, P=3.0
- Vice
- Multi - spindel
